SMICR
Recognised by the OPM Flow parserSOLUTION
The SMICR keyword defines the initial equilibration microbial concentration values for all grid cells in the model. The keyword should only be used if either the BIOFILM or MICP model has been activated in the RUNSPEC section.
Note
This is an OPM Flow specific keyword.
Notes:
The number of entries should correspond to the NX x NY x NZ parameters on the DIMENS keyword in the RUNSPEC section, unless the BOX keyword defines a sub area of the grid, in which case the total number of entries should correspond to the number of cells defined by the BOX statement.
The keyword is terminated by a “/”.
For both BIOFILM and MICP models, see also the SBIOF keyword, and for the MICP model, the SCALC, SOXYG, and SUREA keywords to define the initial state of the model.
- Records
- An array of values covering the grid
Parameters
| No. | Name | Description | Field | Metric | Lab | Default |
|---|---|---|---|---|---|---|
| 1 | SMICR | SMICR is an array of real numbers that are greater than or equal to zero assigning the initial equilibration microbial concentration values to each cell in the model. Repeat counts may be used, for example 20*0.1500. | lb/ | kg/ | gm/ | None |
Example
--
-- DEFINE INITIAL EQUILIBRATION MICROBIAL CONCENTRATION FOR ALL CELLS
-- BASED ON NX = 100, NY = 100 AND NZ = 3
--
SMICR
1000*0.0000 1000*0.0000 1000*0.1500 /
The above example defines the initial equilibration microbial concentration values to be 0.0000 for all the cells in the first and second layers and finally 0.1500 for all the cells in the third layer.
| Note This is an OPM Flow specific keyword. |
|--------------------------------------------|Related keywords
- Requires
WATER
Manual source: parts/chapters/subsections/10.3/SMICR.fodt