PLYATEMP

Recognised by the OPM Flow parserPROPS

This keyword defines the polymer adsorption temperature for subsequent polymer adsorption tables entered via the PLYADS and PLYADSS keywords in the PROPS section. The Polymer option must have been activated by the POLYMER keyword in the RUNSPEC section and the Thermal option invoked by the THERMAL keyword, also in the RUNSPEC section.

This keyword is not supported by OPM Flow but would change the results if supported so the simulation will be stopped.

Notes:

The keyword is terminated by a “/”.

Records

An array of values covering the grid

Parameters

Example

The example shows how to enter the polymer adsorption data using the PLYADS keyword for two different temperatures.
--
-- RESERVOIR
-- TEMPERATURE
-- -----------
PLYATEMP
60.0 / TEMPERATURE
--
-- POLYMER ROCK ADSORPTION TABLE
--
PLYADS
-- POLYMER POLYMER
-- POLCON POLRATIO
-- ------- --------
0.0 0.00000
2.0 0.00003
4.0 0.00005
6.0 0.00007
8.0 0.00009
10.0 0.00011
12.0 0.00012
14.0 0.00015 / TABLE NO. 01
--
-- POLYMER POLYMER
-- POLCON POLRATIO
-- ------- --------
0.0 0.00000
3.0 0.00004
5.0 0.00006
7.0 0.00008
8.0 0.00009
10.0 0.00011 / TABLE NO. 02
--
-- RESERVOIR
-- TEMPERATURE
-- -----------
PLYATEMP
120.0 / TEMPERATURE
--
-- POLYMER ROCK ADSORPTION TABLE
--
PLYADS
-- POLYMER POLYMER
-- POLCON POLRATIO
-- ------- --------
0.0 0.00000
2.0 0.00003
4.0 0.00005
6.0 0.00007
8.0 0.00009
10.0 0.00011
12.0 0.00012
14.0 0.00015 / TABLE NO. 01
--
-- POLYMER POLYMER
-- POLCON POLRATIO
-- ------- --------
0.0 0.00000
3.0 0.00004
5.0 0.00006
7.0 0.00008
8.0 0.00009
10.0 0.00011 / TABLE NO. 02
Here the first PLYATEMP keyword defines the temperature to be 60 °F for the subsequent two polymer rock adsorption tables, assuming NTSFUN equals four and NSSFUN is greater than or equal to eight on the TABDIMS keyword in the RUNSPEC section. The next PLYATEMP keyword defines the temperature to be 120 °F for the subsequent two polymer rock adsorption tables.

Manual source: parts/chapters/subsections/8.3/PLYATEMP.fodt