ENDBOX — OPM Flow Keyword Reference

Variant 1 — GRID section

This keyword marks the end of a previously defined BOX sub-grid as defined by a previously entered BOX keyword. The keyword resets the input grid to be the full grid as defined by the NX, NY, and NZ variables on the DIMENS keyword in the RUNSPEC section.

There is no data required for this keyword.

Records: No records — the keyword stands alone

Example

--
-- DEFINE INPUT BOX FOR EDITING INPUT ARRAYS
--
-- ---------- BOX ---------
-- I1 I2 J1 J2 K1 K2
BOX
10 10 1 6 1 1 / DEFINE BOX AREA
--
--
-- DEFINE GRID BLOCK PERMZ DATA FOR THE INPUT BOX
--
PERMZ
6*0.01 /
--
-- DEFINE END OF INPUT BOX EDITING OF INPUT ARRAYS
--
ENDBOX
The above example defines a subset of the grid and sets the cells PERMZ values to 0.01 for that area. After which the ENDBOX keyword resets the input to be the full grid.
Note
It is good practice to always use the ENDBOX keyword to reset the input back to the full grid when all the modifications for a sub-grid have been completed.
| Note It is good practice to always use the ENDBOX keyword to reset the input back to the full grid when all the modifications for a sub-grid have been completed. |
|-------------------------------------------------------------------------------------------------------------------------------------------------------------------|

Manual source: parts/chapters/subsections/6.3/ENDBOX.fodt

Variant 2 — EDIT section

This keyword marks the end of a previously defined BOX sub-grid as defined by a previously entered BOX keyword. The keyword resets the input grid to be the full grid as defined by the NX, NY, and NZ variables on the DIMENS keyword in the RUNSPEC section.

See ENDBOX – Define the End of the BOX Defined Gridin the GRID section for a full description.

Records: No records — the keyword stands alone

Manual source: parts/chapters/subsections/7.3/ENDBOX.fodt

Variant 3 — PROPS section

This keyword marks the end of a previously defined BOX sub-grid as defined by a previously entered BOX keyword. The keyword resets the input grid to be the full grid as defined by the NX, NY, and NZ variables on the DIMENS keyword in the RUNSPEC section.

See ENDBOX – Define the End of the BOX Defined Gridin the GRID section for a full description.

Records: No records — the keyword stands alone

Manual source: parts/chapters/subsections/8.3/ENDBOX.fodt

Variant 4 — REGIONS section

This keyword marks the end of a previously defined BOX sub-grid as defined by a previously entered BOX keyword. The keyword resets the input grid to be the full grid as defined by the NX, NY, and NZ variables on the DIMENS keyword in the RUNSPEC section.

See ENDBOX – Define the End of the BOX Defined Gridin the GRID section for a full description.

Records: No records — the keyword stands alone

Manual source: parts/chapters/subsections/9.3/ENDBOX.fodt

Variant 5 — SOLUTION section

This keyword marks the end of a previously defined BOX sub-grid as defined by a previously entered BOX keyword. The keyword resets the input grid to be the full grid as defined by the NX, NY, and NZ variables on the DIMENS keyword in the RUNSPEC section.

See ENDBOX – Define the End of the BOX Defined Gridin the GRID section for a full description.

Records: No records — the keyword stands alone

Manual source: parts/chapters/subsections/10.3/ENDBOX.fodt

Variant 6 — SCHEDULE section

This keyword marks the end of a previously defined BOX sub-grid as defined by a previously entered BOX keyword. The keyword resets the input grid to be the full grid as defined by the NX, NY, and NZ variables on the DIMENS keyword in the RUNSPEC section.

See ENDBOX – Define the End of the BOX Defined Gridin the GRID section for a full description.

Records: No records — the keyword stands alone

Manual source: parts/chapters/subsections/12.3/ENDBOX.fodt